MBM Corporation 46 Installation - Manual (Page 2)

Page 2 (13) Art. nr 45961 Sep 2000
T09120
REPLACING THE CAPACITOR
1. Cut off the legs of the new
capacitor so that 2-3 mm
remains.
2. Place the PCB face up with the
heat sinks to the left and
connector J3 to the right.
Capacitor C35 is located
between R4 and R5 just below
the processor. Cut off the
capacitor.
3. Turn the PCB over. Locate the
legs of the original capacitor.
Solder the new capacitor onto
the legs of the old one.
REINSTALLING
Installation is an exact reversed
procedudre of removal
heat
sink
heat
sink
connector
J3
connector
J3
heat
sink
heat
sink