MBM Corporation 46 Installation - Manual (Page 5)

Page 5 (13) Art. nr 45961 Sep 2000
T09120
VERIFYING INTERFACE MODE
A C T I V E S T O P P O S .
I N S E R T P O S I T I O N
D E A D C Y C L I N G
T O T A L C O U N T E R
I N T E R F A C E
M O D E A U T O I S :
COLLATOR PL90
DFA
P L 9 0 / S T R E A M F E E D
CAN
Using the Model 45 and Model 46 together in a system,
the Model 45 must be in interface mode ”CAN”. To verify
the interface mode:
1. Select ”INTERFACE” from the service menu.
2. Check that the Model 45 is set to interface mode
”CAN”. If not, select ”CAN” using the arrow buttons
and press the ”OK” button.
3. After changing/verifying the interface mode, press
the ”ESC” button once or twice (depending on
action taken). The Model 45 will now be in operator
mode.
4. Switch off the main power switch.