MBM Corporation AUTOBOOK - Manual (Page 10)

Installation
Open the top cover and get rid off the
wire tie from the folding roller.
Lift up the stapler head lever. Then
remove the sponge pad under the
stapler head.
Move the stapler heads to certain
position which are matching the
paper size.
Close the top cover and plug in the
power cord.
Please check the power requirement of the machine from
the serial number tag before plug in the power cord.
Open the cassette from the stapler
head and load staples.
Europe
U.S.A.
3
FIGURE 01
FIGURE 02
FIGURE 03
P.9