Mega Catch MCU-800 Ultra - Manual (Page 17)

15
Start time program 2. Enter start time with
HOUR/MINUTE buttons.
THEN PRESS PROGRAM.
Stop time program 2. Enter stop time with
HOUR/MINUTE buttons. To enter more programs (up to 6)
repeat previous steps.
THEN PRESS CLOCK TO RETURN TO NORMAL OPERATION.
Press the ON/AUTO/OFF button to change position of the
mode indicator.
ON = system will be operating at all times.
AUTO = system will be operating only during programmed
times.
OFF = system will not operate at all
NOTE: If the Trap does not operate when the program mode
is set to AUTO it may be in "stop time program." To check,
switch the program mode to ON, which should start the Trap,
before returning the program mode to AUTO.
*
AM
2 ON
_ _ _ _
Mega Catch
Mo Tu We Th Fr Sa Su
R RESET
RECALL
AM
1
OFF
_ _ _ _
Mega Catch
Mo Tu We Th Fr Sa Su
R RESET
RECALL
AM
2
OFF
_ _ _ _
Mega Catch
Mo Tu We Th Fr Sa Su
R RESET
RECALL
AM
12:33
33
Fr
Mega Catch
R RESET
RECALL
FIG 4.3
FIG 4.4
FIG 4.5
FIG 4.6