Mega Catch MCU-800 Ultra - Manual (Page 22)

20
The casing of your Mega-Catch™ Mosquito Trap is made from polypropylene, which is extremely
strong and durable. Its appearance is best maintained by a plastic protector of the type used
on plastic car fenders. Do not use wax.
In order to prolong the life of your Mega-Catch™ Mosquito Trap store it and the Mega-Catch™
Stand in a dry place when not in operation. Your Mega-Catch™ Mosquito Trap should be
serviced at the end of each season (see Page 23 - Maintenance and Repair of Your Trap
section).
To remove safety guard,
turn counterclockwise
until lugs release.
To fit, align 4 lugs on
fan housing with 4 slots
on safety guard, then turn
clockwise until tight.
Lug Lug
Lug
Lug
Slot
Slot
Slot
Slot
Rotate clockwise to fit
and tighten
Rotate counterclockwise
to remove
Bottom plate
FIG 7 - Removal of Fan Safety Guard
Replacement of U.V. Blub
The U.V. Bulb is a consumable item and replacements can be obtained from your Authorized
Distributor. To install a new U.V. Bulb refer to Page 23 - Maintenance and Repair of Your
Trap section.