Measurement Computing DAQFlex User Guide - Manual (Page 123)

DAQFlex Software User's Guide Hardware Reference – USB-7204
123
Component
Supported
Property/Command Set/Get Supported Values
AO
Get Number of analog output channels
CAL Set/Get ENABLE, DISABLE
SCALE Set/Get ENABLE, DISABLE
AO{ch}
RANGE Get UNI4.096V
VALUE Set 0 to 4095
AOSCAN
BUFSIZE Set/Get
COUNT Get
HIGHCHAN Set/Get 0 to 1
INDEX Get
LOWCHAN Set/Get 0 to 1
RANGE Get UNI4.096V
RATE Set/Get 1 kHz to 10 kHz (1 channel)
SAMPLES Set/Get 0 to N
(0 = continuous scan; N = 32-bit)
SCALE Set/Get ENABLE, DISABLE
START
STATUS Get IDLE, RUNNING, UNDERRUN
STOP
CTR
Get Number of counter channels
CTR{ch}
START
STOP
VALUE Get 0 to 4,294,967,295
Set 0
DEV
FLASHLED/{n} Set 0 to 255
FWV Get MM.mm (M = major; m = minor)
ID Set/Get Up to 56 characters
MFGCAL Get yyyy-mm-dd HH:MM:SS
MFGCAL{item} Get YEAR as yyyy; 20xx
MONTH as mm; 01 to 12
DAY as dd; 01 to 31
HOUR as HH; 01 to 23
MINUTE as MM; 01 to 59
SECOND as SS; 01 to 59
MFGSER Get Up to 8 hexadecimal digits
DIO
Get Number of digital ports
DIO{port}
DIR Set/Get IN, OUT (port-configurable)
VALUE Set/Get 0 to 255
DIO{port/bit}
VALUE Set/Get 0 or 1