Measurement Computing DAQFlex User Guide - Manual (Page 94)

DAQFlex Software User's Guide FlexTest Utility
94
o Select AISCAN:RANGE =*. Highlight the asterisk and enter "BIP10V", then click Send Message .
This field is not case-sensitive.
o Select AISCAN:RATE =*. Highlight the asterisk and enter "1000", then click Send Message .
o Select AISCAN:SAMPLES =*. Highlight the asterisk and enter "512", then click Send Message .
4.
Start the scan operation: Select AISCAN:START and click Send Message .
The FlexTest window displays the scan data in the Response area, and the MessageLog window lists the
messages sent to the device.
Notes
 String data entered into the Message field is not case sensitive.
 Messages that begin with "?" are query messages. Select a query to read a value.
Calibrate a device
For devices that support self-calibration, FlexText displays a
Calibrate
button on the AI tab to calibrate
analog inputs. For devices with analog outputs FlexText displays a Calibrate button on the AO tab.
Calibrating analog inputs
To calibrate a device's analog inputs, do the following:
1.
Select the AI tab .
2.
Click the
Calibrate
button.