Measurement Computing WaveBook rev.5.3 User Manual
Wavebook, High-speed portable data acquisition systems
Advertising
USER’S MANUAL
WaveBook
High-Speed Portable Data Acquisition Systems
WaveBook
489-0901 Rev. 5.3
IOtech
25971 Cannon Road
Cleveland, OH 44146-1833
(440) 439-4091
Fax: (440) 439-4093
www.iotech.com
*372349B-01*
372349B-01
Requires one of the following
Operating Systems:
Windows 2000 SP4
Windows XP
Windows Vista**
A Hardware Reference Manual for:
WaveBook/512A
WaveBook/516
WaveBook/516A
WaveBook/516E
** Windows Vista does not support
/512A, /516, or /516A models.
WaveBook/516E is supported.
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- WaveBook User's Manual
- Warnings, Cautions, Notes
- Related Documents
- About WaveBook Documentation
- Table of Contents
- Quick Start - WaveBook/516E
- Quick Start - WaveBook/512A and /516A
- 1 - An Introduction . . .
- 2 - System Setup and Power Options
- Minimum System Requirements
- Understanding WaveBook and WBK Connectors
- Parallel Port Connections
- Ethernet Connections
- Overview
- Step 1 – Install the Software
- STEP 2 – Determine the type of Network Connection
- STEP 3 – Connect the System Components
- STEP 4 – Power-up the System Components
- STEP 5 - Configure the Computer’s Network Settings [Applie
- STEP 6 - Configure Device Network Settings using DaqIPConfi
- STEP 7 - Configure and test the System using the Daq* Confi
- System Enhancement and Expansion
- Connecting the System to Power
- Power Supplies
- 3 - System Examples
- 4 - WaveBook Operation Reference
- 5 - Software and Related Documents, an Overview
- 6 - CE Compliance and Noise Considerations
- 7 - Troubleshooting and Customer Support
- 8 - Specifications
- 9 - Fuse Replacement
- Appendix A – Using the Daq Configuration Applet
- Appendix B – TCP/IP and Resource Tests
- Glossary