Metz MECABLITZ 44 AF-1 digital - Manual (Page 89)

89
k
The rechargeable batteries/batteries are
empty or flat when the flash delay
exceeds 60 seconds (interval between
triggering a full output flash, e.g. in M,
and when the flash readiness indicator is
relit).
• Switch off the flash unit by pressing
the
ቢ button until all LED displays
are off.
• Remove the flash device from the came-
ra and slide the battery cover
ቫ
downwards.
• Insert the batteries and slide the batte-
ry cover
ቫ back into place.
Please ensure the batteries/rechargeable
batteries are inserted correctly by chek-
king against the symbols in the battery
compartment. Incorrect insertion can ter-
minally damage the unit. Risk of explosi-
on in event of improper use of batteries.
Always replace all batteries with the
same high-quality brand batteries of the
same capacity. Used batteries and
rechargeable batteries should not be dis-
posed of with domestic waste. Do your
bit for the environment and dispose of
used batteries/rechargeable batteries at
designated collections points.
3.3 Switching the flash unit
on and off
• Switch on the flash unit by pressing the
button
ቢ The unit will revert to the
last operating mode and the LED dis-
play will light up accordingly.
The button flashes red in standby
mode. Switch off the flash unit by pres-
sing the button
ቢ until all LED dis-
plays are off.
In the event that the flash unit will not
be required for a longer period of time,
we recommend switching the unit off
by pressing the
ቢ button and remo-
ving the power supply (batteries,
rechargeable batteries).
3.4 Automatic unit
shut-off / Auto OFF
The flash unit is configured so that
10 minutes after -
• switching on,
• triggering the flash,
• lightly depressing the camera shutter
release,
+
M
TTL
SL
M
TTL
SL