Metz MECABLITZ 44 AF-1 digital - Manual (Page 94)

+
+
+
+
94
k
Exposure correction through alteration of
the lens aperture is not possible, as the
camera’s automatic exposure views the
altered aperture as the normal working
one.
Manual flash exposure correction in
TTL flash modes can only take place if
the camera supports this feature (see
camera operating instructions).
Don’t forget to delete the TTL exposure
correction on the camera after the shot.
Highly reflective objects in the inten-
ded shot can disturb the camera’s
automatic exposure. This results in
underexposure. Remove reflective
objects or set a
positive correction value.
5.2 Manual flash mode
In manual flash mode M, full flash output
is deployed if no partial lighting is set.
By selecting a suitable partial light out-
put or adjusting the camera’s aperture, it
is possible to adapt to the ambient situa-
tion. The adjustable range stretches from
P 1/1 — P1/64.
Configuration procedure
• Switch on the flash unit by pressing the
button
ቢ.
• Press "M"
ባ to set the manual opera-
ting mode M .
Manual partial light output
Partial light output can be configured in
manual operating mode M.
Configuration procedure
• Press the "M"
ባ button on the flash
unit until the LED illuminates the desi-
red partial light output 1/1, 1/2, 1/8 or
1/64.
The setting is effective immediately and
saved automatically.
Various camera types only support
manual flash adjustment in manual M
camera operating mode.
+
+
+
+
M
TTL
SL
1/1 1/2 1/8 1/64
M
TTL
SL