MicroLinks VT300 - user manual - Manual (Page 48)

Microscope Application Program http://www.ViTiny.com
Copyright ©2008-2012 MicroLinks Technology Corp.
Figure5-37 horizontal scale range
5.60mm
Figure5-38 vertical scale range
4.20mm
EX3: Measurement for contacted object in high mag.
Use the “metal ruler” as a measurement base, flatly put the machine on the
observing object, adjust the focus to find the clearest image. See Fig.5-39 and
Fig.5-40 the result from measurement. Horizontal and vertical scale is 1.40mm
and 1.05mm.
Figure5-39 horizontal scale range
1.40mm
Figure5-40 vertical scale range
1.05mm
EX4: Calibrate the scale for contacted in low mag.
Use the “calibrator” as a measurement base, flatly put the machine on the
observing object, adjust the focus to find the clearest image. See Fig.5-41 and
Fig.5-42 the result from measurement. Horizontal and vertical scale is 5.6mm
and 4.20mm. Using a calibrator is more easily and accurately to get scale range.