MicroLinks VT300 - user manual - Manual (Page 55)

Microscope Application Program http://www.ViTiny.com
Copyright ©2008-2012 MicroLinks Technology Corp.
Figure5-57 Setting of picture
magnification ratio display
Figure5-58 Saved ratio
 To delete and rename scale file
Choose delete or rename the file from the drop down menu, see Fig.5-59. Then
click “delete” or “rename”.
Fig.5-59 drop down menu choose file
 Semi-Auto Calibration
Set up a customized semi-auto Calibration. See Fig 5-60. “Input Measurement
Length” means the real length. For example, enter 400 means 4.00mm, enter 50
means 0.5mm. The Display Scale check-box is to decide to show the Display
Scale or not. If click the Horizontal Fixed, only a horizontal axis can draw on
the image; on the contrary, if click the Vertical fixed, only a vertical axis can
draw on the image. If choose “None”, axis can draw from any direction. A
horizontal or vertical axis can be draw by pressing „shift‟ button on your keyboard
together with clicking mouse left. After it is completed , please click “Finished”
for saving the new scale.
Fig 5-60 Input the actual measurement length