MicroLinks VT300 - install manual - Manual (Page 13)

Microscope Installing http://www.ViTiny.com
13
Copyright © 2008-2012 MicroLinks Technology Corp.
Prepare to start copying files, if you want to change or review any settings, click
“Back”. If install settings were confirmed, click “Next” to start copying files as shown
in Fig. 3-4.
.
Fig.3-4 Review settings before copying files
3.2.3 Now installing
See [Fig 3-5], Driver is now installing; if you want to stop installing, please click
“Cancel”.
Fig.3-5 Now installing Device