MicroLinks VT300 - install manual - Manual (Page 14)

Microscope Installing http://www.ViTiny.com
14
Copyright © 2008-2012 MicroLinks Technology Corp.
3.2.4 Install Complete
Complete device setup (Fig. 3-6), click “finish” and then driver program is completed.
Fig. 3-6 Device installations complete
3.2.5 After Installation Completed
After installation is completed, click Start -> all programs you will see driver file shown as
[Fig.3-7].
Fig.3-7 Driver is at all programs position.
MICROSCOPE can be executed from ICON AMCap see [Fig. 3-7]. However, AMCap is
a simple tool for preview only. It can’t support image process or functions in the
MICROSCOPE AP.