Monster ClarityHD Precision Micro Bluetooth Speaker 100 - Manual (Page 9)

14 15
Sound is very low
or no sound
• Please check ClarityHD Precision
Micro Bluetooth Speaker or Bluetooth
device Volume Level
• If using 3.5 mm port, be sure the
minijack cable is securely inserted
into ClarityHD Precision Micro Bluetooth
Speaker and your device
Music is playing on a
device but isn’t transferring
to ClarityHD Precision
Micro Bluetooth Speaker
• Make sure your Bluetooth device has A2DP
(check your device’s owner’s manual)
• Be sure the device is paired
• If using 3.5 mm port, be sure the minijack
cable is securely inserted into ClarityHD
Precision Micro Bluetooth Speaker
and your device
Controlling Volume When Connected Via 3.5 mm “AUDIo IN” Input:
NotE: Volume cannot be controlled with the volume control
on ClarityHD Precision Micro Bluetooth Speaker when
connected via the 3.5 mm “AUDIO IN” input. Use the volume
control on your device as you normally would.
Recharging Battery
Make sure the power switch is set to “ON.” Plug the Mini USB
end of the included USB cable into the USB mini port, marked
“USB Charging” on the back of ClarityHD Precision Micro
Bluetooth Speaker. Plug the other end into a USB port on
your computer or other devices made for USB charging. The LED light will
begin to flash BLUE. It will stop flashing at full charge. Charge time is 3 hrs
from an empty battery.
NotE: Always be sure to switch ClarityHD Precision Micro Bluetooth Speaker
to the “OFF” position when not in use to save battery charge.
trouble Shooting