Monster FlatScreen SuperThin Tilt Mount - Up to 27” Screens - Manual (Page 17)

17
Hanging your Flatscreen TV on the wall Plate
1
Connect the TV’s power cord and any AV cables
to the TV before hanging it. Plug the TV’s
power cord into a nearby AC outlet. If routing AV
cable in wall, run it through the prepared opening
in your wall.
2
With the help of another person, lift your TV
up to mount level. Raise the TV just above the
wall mounting plate. Slide the TV and mounting
plate downward onto the wall mounting plate.
3
Firmly secure the TV mounting plate on the
wall plate by tightening the provided security
screws through the security tabs on either side
of the mount. Tighten the screw with a Phillips
screwdriver. Do not over tighten.
Congratulations
You’ve successfully installed your Monster SuperThin
™
FlatScreen Mount.
Visit us at www.MonsterCable.com/FlatScreen for more innovative Monster FlatScreen products.