Monster FlatScreen SuperThin Tilt Mount - Up to 63” Screens - Manual (Page 8)

8
wood Stud Mounting (cont’d)
4
Position the wall mounting plate over the holes
drilled in the wall studs.
3
With your electric drill and ³∕₁₆" bit, pre-drill
a 3" deep hole where indicated on template.
After drilling holes, remove template from wall.
5
Make sure the wall plate is level by using the
supplied bubble level. Place the provided level
on the wall plate and confirm that the wall plate is
horizontally straight. Hold the plate firmly in place.