Montigo M38ODV ST - Manual (Page 10)

XG0128 Page 10
M38ODV-ST Direct Vented Fireplace
Installation Operation
Lighting Instructions
See Pages 12.
Figure 15. Hi-Lo' Adjustment on the M38ODV-ST gas valve.
Burner Adjustment
The M38ODV-ST is equipped with an adjustable burner, allowing you
to raise or lower the flames. To adjust the flames, locate the black knob
marked 'Hi-Lo', in the centre of the gas control valve (See Figure 15).
The front burners are not adjustable.
„ To raise the flame height, turn the black knob (located behind the
lower trim) counterclockwise.
„ To lower the flame height, turn clockwise.