NewHank BDP-432 - Manual (Page 19)

17
Setup – customizing setting in the main menu
Specific setting method and description
Menu Submenu Item Setting and description
ON
Enable screen saver. If there is no operation in
Fifteen minutes while playing, the screen saver
will be activated automatically, and enters standby
mode if there is no operation in Fifteen minutes.
OFF
Disable this function
ON
Enable auto-play. When a disc is inserted, the
player will read and play automatically.
OFF
General System
Screen saver
(prevent screen aging)
Disc Auto Playback
!
Disc
The upgrade program is saved in the disc. When
the auto-upgrade function is set to “OFF”, you
need to select the upgrade option manually after
inserting the disc.
USB storage
The upgrade program is saved in USB disk.
Network
Connect the network cable to the NIC interface
Upgrade
(software update)
Load Default
(restore default settings)
Select this option and press [OK], and the
following dialog box appears:
Press or to select [OK], and press it to restore
all the settings to default, or select [Cancel] to exit
the dialog box.
Load Default
Do you want to load default
OK Cancel
ON
When this function is enabled, the player is in
standby, and the device connected through HDMI
is also in standby.
OFF
This function is disabled.
CEC
and make sure that the network connection is
normal.
Setting