Oppo HA-1 - Manual (Page 17)

13
Using the OPPO HA-1
Basic Operations
Power On / Off
When the HA-1 is initially connected to AC power, it stays in standby mode. Pressing the Power Button on the HA-1
will result in the Power Status Indicator turning blue, indicating the HA-1 has powered on. When the unit is powering
on, the OPPO logo will appear on the screen. When it is fully ready, one of the pre-selected Home Screens (Status,
Spectrum or VU Meter) will appear.
Once the HA-1 has powered on, pressing the Power Button again will turn the unit off, at which time the Power
Status Indicator will turn off, indicating that it is in standby mode.
Remote:
The POWER button on the remote control functions in the same way as the Power Button on the front panel of the
HA-1.
The Front Panel Display
When the HA-1 is in its normal operational mode, it shows one of the pre-selected Status, Spectrum or VU Meter
screen on its Front Panel Display. This is called the Home Screen Selection.
When there is any user operation, the Front Panel Display changes accordingly. Please use it as the visual aid for all
operations.
Source Selection
The active input source can be selected by rotating the Source Selector Knob. The Front Panel Display will show a
Source Selection screen, with the active input source highlighted. When the Source Selector Knob is rotated in
either direction, a new input source is highlighted. Once you settle down on an input source by leaving the highlight
cursor on it or by pressing the Source Selector Knob, the new input source becomes active and the Front Panel
Display returns to the Home Screen.
Source
Volume
Ba l anced
HEADPHONE AMPLIFIER HA-1 iPod/iPhone/iPad
USB