Chenbro Wireless LAN PC Card 11Mbps - Manual (Page 11)

Fig 3-7 Select Program Folder
10
5. You can specify a folder name of this program. (Fig 3-7)
6. After copying files, you will finish the installation. (Fig 3-8)
Inserting the adapter
After properly inserting the Network Adapter into your notebook, continue with the WLAN driver
and configuration utility installation.(Fig 3-9)
NOTE: The PCMCIA slot allows “hot swap” of PCMCIA adapter. You may insert or remove the
WLAN PCMCIA adapter from the slot anytime, even when the power of your computer is on.
NOTE: Windows 98 requires that the Network card and socket services must be compliant with
the PCMCIA revision 2.10 specification. Please check the documentation of the PCMCIA driver
before installing the WLAN PCMCIA adapter.
To insert the wireless LAN Card into a notebook computer, do the following:
1. Locate an available Type II or Type III PCMCIA slot.
2. With the PCMCIA adapter’s 68-pin connector facing the PCMCIA slot and the “Brand Name of
PCMCIA” label facing up side the PCMCIA adapter completely into the PCMCIA slot.
Fig 3-9 Insert the Wireless LAN card into Notebook
Fig 3-8 Finish