Chenbro Wireless LAN PC Card 11Mbps - Manual (Page 15)

An acronym for Service Set Identifier, SSID is the unique name shared among all points in a
wireless network. The SSID must be identical for all points in the network. It is case sensitive and
must not exceed 32 characters.
The Tx Rate field shows the current transfer rate for the Network PC Card. To optimize perfor-
mance and range, the Tx Rate should be set to Auto, which will automatically adjust the transfer
speed for best performance and longest range.
The Channel setting specifies the channel used in wireless communication and should be set
to the same channel as the other points in the wireless network. The setting can only be adjusted in
Ad-Hoc mode.
Fig 4-3
Statistics
The Statistics screen (Shown in Fig 4-3) provides information about the Tx / Rx Data, Manage-
ment, and rejected Packets.
Site Survey
The Site Survey screen shows some features of the available access points or other stations.
Click on the desired access point / station. Then double click BSSID to connect or Re-Scan to
search for more access points. (Shown in Fig 4-4)
Fig 4-4
14