Chenbro Wireless LAN PC Card 11Mbps - Manual (Page 21)

20
3. In the “Network” settings window you will be prompted to install Windows NT Networking in
case no network has been installed yet. Click “Yes” and follow the instruction on the screen. If
networking had been already installed, you will see a dialog with several tabs. In the “Adapters” tab
click the “Add” button. Windows NT Networking Setup will determine the type of network adapter
card that you are going to use. (Fig 5-1).
Fig 5-1
Fig 5-2
Fig 5-3 Fig 5-4
4. Click “Have Disk” (Fig 5-2), Select D: \ WLAN USB&PCMCIA\NT4 driver\Rev E (where D:
is the letter of your CD-ROM drive). (Fig 5-3).
5. Select Adapter and Click “OK” (Fig 5-4).
6. Next Windows will start copying the files. In case there is a version conflict between one or
more of the files being copied and files in your system, you should normally keep the latest version.