Chenbro Wireless LAN PC Card 11Mbps - Manual (Page 22)

NOTE: If the card is not working properly, after a restart procedure, you
should make sure that your system has free resources ever it may shows them
as being available.
3 3 3 3 3
21
7. Finally, when the installation has been completed, (Fig 5-6). you will need to restart your
computer.
6. During the installation, a dialog box appears asking for the I/O base and IRQ resource
information. In order to find out which values to use, go to Start XProgramsXAdministrative Tools
XWindows NT DiagnosticsXselect the “Resources” tab Xpress the “IRQ” button. Select one free
IRQ from the list. Next, press the button “I/O Port” and choose an 0x20 free I/O space. Add these
values into the dialog box. If at any point after the installation you want to change these values, go to
the Control PanelXNetwork, select the Adapters tab, press the Properties button, and fill in the new
values.(Fig 5-5).
Fig 5-5
Fig 5-6