Paso Sound PDVD01U - Manual (Page 25)

TASCAM DV-D01UT/C

Special picture playback
Frame-by-frame playback
During playback
Press
π
repeatedly.
Each time you press the button, the still picture
advances by one frame.
·
To return to normal playback
Press ¥ (play button).
Playing back in slow-motion
During playback
Press π at the point where you
want to start playback in slow-
motion from.
The unit pauses playback.
·
1.
Press SLOW +.
Playback in forward slow-motion starts.
For DVD VIDEO only:
To play back in reverse slow-motion, press SLOW -.
Each time you press the button, the playback speed becomes
faster.
Example: On the TV
To return to normal playback
Press ¥ (play button).
NOTE
Sound cannot be heard during slow-motion playback.
Zooming in
During playback or while paused
Press ZOOM.
Each time you press ZOOM, scene magnifi-
cation changes.
·
1.
While zoomed in, press Cursor
¥
/
˙
/
§
/
¶
to move zoom-in area.
To return to normal playback
Press ZOOM repeatedly to select ZOOM OFF.
NOTE
The number of the magnification steps varies depending on
the disc type.
During slide-show playback of JPEG, zooming in is not
available. In such a case, press π to pause slide-show
playback, then zoom in.
During playback, there may be a case where Cursor
(¥
/
˙
/
§
/
¶ ) does not work in step
2
above.
2.
•
•
2.
•
•
•
Changing the VFP setting
The VFP (Video Fine Processor) function
enables you to adjust the picture character
according to the type of programming, picture
tone or personal preference (except when
connecting the TV through HDMI terminal).
For DVD VIDEO/DVD VR/VCD/SVCD: During playback
For DVD AUDIO: During playback while picture is shown
Press FVPP.
The current VFP settings appear on the TV screen.
Example:
Press Cursor
§
/
¶
repeatedly to select
the VFP mode.
NORMAL: Normally select this.
CINEMA: Suitable for movies.
When you select “NORMAL” or “CINEMA”, press VFP to
complete the setting.
USER 1 and USER 2: You can adjust parameters that
affect picture appearance.
Only when selecting “USER 1” or “USER 2” in step 2,
proceed to perform the following operation;
Press Cursor
§
/
¶
repeatedly to select a
parameter you want to adjust.
Adjust gradually and confirm picture appearance results are
as preferred.
GAMMA: Controls brightness of neutral tints while
maintaining brightness of dark and bright portions (-3 to +3).
BRIGHTNESS: Controls screen brightness (-8 to +8).
CONTRAST: Controls screen contrast (-7 to +7).
SATURATION: Controls screen color depth (-7 to +7).
TINT: Controls screen tint (-7 to +7).
SHARPNESS: Controls screen sharpness (-8 to +8).
Press ENTER.
Example:
Press Cursor
§
/
¶
to change the setting.
Press ENTER.
The current VFP settings appear again.
Repeat steps 3 to 6 to adjust other
parameters.
Press FVPP.
NOTE
Although the setting display disappears in the middle of the
procedure, the setting at that time will be stored.
The VFP function is not available when connecting the TV
through HDMI terminal.
“TINT” setting is not effective when connecting the TV
through COMPONENT VIDEO OUT jacks.
·
·
1.
2.
•
•
•
•
3.
•
•
•
•
•
•
4.
5.
6.
7.
8.
•
•
•
Advanced operation See page 16 for button locations.