Relacart Electronics WAM-400 - Manual (Page 11)

CH1-CH2-CH3-CH4
P19 P20
WAM-400 Menu Display:
CONTROL
(3 seconds)
Mode
Manual (“Threshold Level” setting)
Auto ( Factory preset, automatic setting by system micro processor)
Last Lock
ON ( the microphone will be always “ON”)
OFF ( the microphone will be OFF after the “Hold Time”)
Hold Time (Set the activated microphone's hold time after the speaker stop speaking)
Priority Select (Set the microphone at priority, 2 units at the most)
Threshold Level (Change the output limiter threshold, under “MODE” is “Manual”)
Volume Level (System main volume output)
Language Select
Chinese
English
Speak Number (Set the simultaneous speaking channels, 4 channel at the most)
Works Set
Pelegate (Two or more mixers link together for use)
Chairman (One mixer use only)
CD Vol Level (CD volume level)
PC Vol Level (Computer volume level)
Exit (Exit the system)
Each Channel Setup
1, Press CH1 button, rotate “CONTROL” knob to select and set Sync, Scan, Channel, SQELCH, or Volume,
press “CONTROL” again to enter edit mode:
①Sync: Infrared data transmitting. Let the transmitter's IR window face to “SYNC” window, press “CONTROL”,
to receive the data signal from the receiver.
②Scan: Stop at “Scan”, then press “CONTROL” knob, system will auto-scan and lock on to an open,
interference-free frequency in 40 S.
③Channel: Stop at “Channel”, then press “CONTROL” knob to select the preset 32 channels manually.
④SQELCH: Stop at “SQELCH”, then press “CONTROL” knob, the squelch level is adjustable in ten 5dB steps,
providing a 50dB range. Press “CONTROL” confirm the desired choice. (If interference is a problem, first
consider trying a different frequency, either manually or scanning.)
⑤Volume: Volume output of CH1, stop at “Volume”, then press “CONTROL” knob, the volume output is
adjustable in sixty-five 5dB steps, providing a -60dB to 5dB range. Press “CONTROL” confirm the desired
choice.
2, Same operation as CHI, to set CH2, CH3 and CH4.
Sync (Infrared data transmitting)
Scan (Automatic frequency scan)
Channel (Select frequency manually)
SQELCH (0dB to 50dB)
Volume (-60dB to 5dB)
Channel Setup Menu Display