Relacart Electronics DAM-800 - Manual (Page 6)

- 6 -
05 Instructions of Installation and Connection
1、Multiple mixers cascade
When multiple mixers are used simultaneously, hand-in-hand connect the LINK IN and LINK OUT port
on the rear panel with “S terminal cable”, the maximum cascading is 16 units. (As shown in Fig).
Connect the mixer, daisy chain function automatically open. Then you can choose the mixer
MASTER and slave, and the audio output of slave is through the MASTER audio output port.
2、Mixer connect to video tracking system
DAM-800 8-channel digital automatic mixer can connect to the VTS-1000 video tracking system by
the RS-232 port to achieve the video conference.
RS-232 port pin indication
RS-232 diagram
Pin indication
1: NC
2: TX(Data output)
3: RX(Data input)
4: NC
5: GND
6: NC
7: NC
8: NC
9: NC
Connect the LINK IN port with the last mixer
Connect the LINK OUT port with next mixer
MASTE
Slave 1
Slave 2
Slave16