How to set up the size and, How to set up the pip – RGBLink VSP 112U User Manual
Page 10
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197
Fax:00865925771202
Email: [email protected]
http://www.rgblink.cn
9
How to Set up the Size and Position of the Single Image
Push the [SCALE] button and enter to the SCALE function menu. The button 0~9 are on, user can
adjust the size by the knob or number buttons.
H SIZE: Width setting.
V SIZE: Height setting.
H POS: Horizontal phase setting.
V POS: Vertical phase setting.
RESET: If image quality distorts by improper operation, it can be recover by reset.
Push the [MENU] button, and choose <PIP>, push the knob to confirm. Choose PIP, and set “ON” to
enable the PIP function.
LAYOUT: User can choose 7 kinds of PIP layouts, here we take 3 layouts for example. The
corresponding results are as follows:
PIP L+T
PBP L+R
PBP T+B
SWAP IMAGE: It can set PIP to swap exchange, when choose ON, it can realize the Image A and
Image B switching.
SELECT: Can choose to set the size or position of IMAGE A or IMAGE B individually.