RGBLink VSP 112U - Manual (Page 11)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
10
How to Set up Image Zoom
The image can be zoom in horizontal or vertical separately, to meet the special effects required.
Push the [MENU] button to go into the menu items, and turn the knob to go to ZOOM menu and push
the knob to confirm to go into ZOOM menu items as following:
V UP--Zoom in vertical and the image will be zoom in to the top direction from its bottom.
V DOWN--Zoom in vertical and the image will be zoom in to the down direction from its top.
V UP/DOWN--Zoom in vertical but in both top and down direction from its middle.
H LEFT--Zoom in horizontal and the image will be zoom in to the left direction from its right.
H RIGHT--Zoom in horizontal and the image will be zoom in to the right direction from its left.
H LIFT/RIGHT--Zoom in horizontal but in both left and right direction from its middle.
CENTER--Zoom in 4 corner direction from center.
How to Realize Test Pattern Output and Settings
Test Pattern is used to calibrate the screen or system, especially when there is not standard input
measure instrument. There are 66 kinds of test patterns for VSP 112U.
1. Push the [MENU] button and go into the main menu, turn knob and go to <SYSTEM> menu.
2. Push the knob and go into the <SYSTEM> menu. Turn the knob and go to <DISPLAY MODE> menu.
3. Push the knob and go into the <DISPLAY MODE> menu. Turn the knob and go to <PURE COLOR>
or <TEST PATTERN> option.
<FLAT COLOR>: Push the knob and go into the menu, RED color range is from 0~255, GREEN is from
0~255, and BLUE is from 0~255.
<TEST PATTERN>: Push the knob and go into the menu, there are 66 kinds of test pattern options
ready. If set the Test Pattern enable as auto switching mode. VSP 112U will output all the Test Pattern
one by one, and the interval between each is 1-10S.