RGBLink RMS 5533 - Manual (Page 22)

2. Panel Instruction
RMS 5533 Front Panel
RMS 5533 User Manual 22
RMS 5533 Front Panel
Front view:
1．Phone
3.5mm earphone jack, for HDMI (supported by DVI input) and SDI
embedded audio monitoring.
2．Power
Power on/off indicator. Plug in the power cord, pus h the ―Power‖ button
and the power indicator is turned on and after 10 seconds, the monitor will
be switched on and get into working status.
Push the ―Power‖ button again, the indicator is turned off and monitor is
switched off.
The monitor will memory the state before shutdown, and will keep the
state when start the computer next time.
Note
Disconnect with power cable if the monitor will
not be used for a period of time.
3．Source
Input signal selection. Push the ‖Source‖ button and push "OK" knob to
select the input video signal: Video, DVI, VGA, USB and SDI (SDI is
optional module).
4. F1