RGBLink RMS 5533 - Manual (Page 38)

5. System Setup and Operation
How to Turn on/off the Monitor
RMS 5533 User Manual 38
How to Turn on/off the Monitor
1. Plug in the power cord.
2. Push the
―Power‖ button, the button light is on, about 10 seconds later,
the monitor begins to work.
3. Push the ―Power‖ button again, the button light is off, the monitor is in
standby state.
4. Disconnect the power, the monitor is turned off.
The monitor will memory the state before shutdown, and will keep
the state when startup the computer next time.
Note
Disconnect with power cable if the monitor will
not be used for a period of time.