Sea Eagle Transom Sport Boats & 8.10yt Yacht Tender (10.6SRY, 10.6SR, 12.6SR, 14SR) - Manual (Page 13)

Power Rod Holder
(OPTIONAL)
Universal cradle holds
almost any reel style
and front locking ring
prevents rod loss when
travelling. Includes
side/deck mount.
Rod Holder
(OPTIONAL)
Holds a bait caster reel
in a cushioned cradle.
Slot in the front allows
for a spinning reel to be
securely held in place.
Includes side/deck
mount.
To install the rod holder
you will first need to drill
through a solid surface
and secure the mount to
it.
To install the mount,
place it over the desired
area and drill a 1 3/8”
through the fittings at
each end of the mount.
Be sure the “logo” on
the mount reads upright
when looking from in-
board before securing
the mount with the pro-
vided hardware.
Next, install the rod
holder by pushing the
post straight down into
the mount. Rod holder
is designed to enter the
mounting bracket only
when pointing inboard
and is locked in every
other direction.
Holder Clamp Mount
(OPTIONAL)
Fully portable mounting
option for use with all
Scotty post mount rod
holders (side/deck
mount. Secure the
mount to the clam and
insert the rod holder into
the mount and connect
the clamp directly to the
transom.
Bilge Pump
(OPTIONAL)
Connect the hose to the
fitting and insert the
other end inside the
boat where water has
accumulated. With the
hose facing outside the
boat, use the handle to
pump out the water
through the hose.
Cleaner & Protectant
(OPTIONAL)
By using our 3M Marine
Cleaner and our 303
Protectant sprays you
can keep the material
on your Sea Eagle Boat
looking and feeling like
new. Sold separately.
12