SILVA ADC Summit - Manual (Page 19)

Altitude Mode
ALTITUDE m
734 80
144
Wind Mode
18.3 8.3
WIND Km/H
21.3
Barometer Mode
BARO hPa
1001.3
Temperature Mode
TEMP C 8
18.2 13.2
28.3
Sensor Functional Mode
10.0 Sensor Functions Mode -
Manual Data Log Function
Data Log Function
To Log the Data Manually - Manual-Log
!
!
!
!
!
!
!
The ADC is equipped with a function to log
the sensor functional mode readings. They
a r e t h e c u r r e n t w i n d s p e e d , a m b i e n t
temperature, barometric pressure and the
altitude at current location.
The record also includes the time and date
that data was logged.
The ADC can log data automatically or
manually. Check the 'Automatic Data Log'
section below for more detail on how to log
data automatically.
To log a data manually, press and hold the [set]
button for about 2 seconds in one of the
functional modes (Temperature, Wind Speed,
Barometer and Altimeter).
When two beeps sounds, the record is logged.
You can log another record at any desirable
moment as long as there is sufficient memory.
Check the coming '
'
section for more detail on how to review the
logged data.
Logged Record and Data
hold [set] 2 beeps
current
wind speed
ambient barometric
pressure
ambient
temperature
altitude at the
current location
Data (The Elements of a Data)
Record no. & Data no
Logging time & date