SILVA ADC Summit - Manual (Page 60)

[mode]
[mode]
[mode] [mode]
Auto-Log
Interval
Setting
PC Syn-
chronization
Delete
all record
and data
Delete the
record that
is displaying
1.
4.
2.
3.
Data Log Mode
Setting Sequence
Data Log Display
hold [mode]
hold
[mode]
Delete the Current Data
Activated Inactivated
[set]
Inactivated
Activated
DEL ALL ?
DEL ALL ?
YES
NO
[set]
To Select Setting Display
!
!
!
Press and hold the [mode] button for about
2 seconds to select the Data Log Mode
Setting Display (the '
' starts flashing).
In setting display, press the [mode] button to
select among the settings following the
adjacent diagram.
1: When the ' ' starts to flash, press the
[set] button to select between ' '
(delete the record that is displaying) and
'
' Display.
2: When the interval digits starts to flash,
press the [set] or [reset] button to scroll to
select the target auto-log interval (hold
down the button to scroll the setting at a
faster pace).
3: When the 'PC SYNC START?' starts to
flash, press [set] button to send the data
from the ADC to PC.
4: When the ' ' starts to flash, press the
[set] button to select between ' ' (delete
all records) and ' ' Display.
When the above setting completed, press
and hold the [mode] button for about 2
seconds to confirm the setting and exit the
setting sequence.
NO
NO
YES
NO
NO
YES
NO
Data Log Mode -
Setting Data Log Mode
15.4.1
DATALOG
r001-0023
2:10.30
06 MAR 2003
DEL? YES
r001-0023
2:10.30
06 MAR 2003
r001-0023
2:10.30
06 MAR 2003
DEL? NO
flash
this data to
be deleted
PC Synchronization
Ready Sending
[set]
if the send
completed
PC SYNC PC SYNC ...
START? STOP?