Sim2 HT300 - Manual (Page 2)

HT 300
2
13 MENU DESCRIPTION
To access the main On Screen Display menu, press the
Menu key on the keyboard or the key Menu + or Menu -
on the remote control
(Fig. 46) .
Fig. 46
The main menu is divided into four sections to cover va-
rious adjustments in a practical and logical manner.
The on-screen menu layout is dependant upon the cho-
sen input signal so various options may not be applica-
ble, i.e. some typical adjustments to the video signal are
not applicable to the graphic RGB signals from PC and
viceversa.
13.1 PICTURE
This menu features adjustments relating to the projected
image quality.
BRIGHTNESS
CONTRAST
COLOR
SHARPNESS
FILTER 20
50
50
7
6
CINEMA MODE Off
PICTURE
Auto
VIDEO TYPE Normal VCR
VIDEO
BRIGHTNESS
CONTRAST
COLOR 20
50
50
PICTURE
TINT 85
SHARPNESS
FILTER 7
6
CINEMA MODE Off Auto
VIDEO TYPE Normal VCR
VIDEO-NTSC
BRIGHTNESS
CONTRAST 50
20
PICTURE
SHARPNESS 5
SHARPNESS MODE Video Graphics
RGB
13.1.1 BRIGHTNESS
Use this control to adjust the image’s black level.
13.1.2 CONTRAST
Use this control to adjust the image’s white level, be ca-
reful not to over saturate the white level.
13.1.3 COLOR
Use this control to adjust the colour level.
13.1.4 TINT
Controls the purity of the colours, to NTSC coded signal
standards. Tint is only applicable to video input with NTSC
standard, to RGB 15kHz and YCrCb 15kHz inputs and
YCrCb 32kHz (no RI2).
13.1.5 SHARPNESS
Use this adjustment to increase and decrease the level of
picture detail.
13.1.6 SHARPNESS MODE
It allows to select the type of processing that determines
the detail. In progressive or de-interlaced video signals
the video option is suggested, with graphic signals from
a PC the Graphic option is suggested.
13.1.7 FILTER
For video signals it improves the image’s horizontal/vertical
definition and sharpness.
13.1.8 CINEMA MODE
In Auto the de-interlaced recognizes if the video signal is
originated from a cinematographic film (resulting from
Teleciné with 3:2 or 2:2 Pull Down) and applies an
interpolation algorithm optimized for this type of signal.
Instead if the video signal does not originate from a
cinematographic film, or Off is chosen, the de-interlacer
applies a “Motion Compensated” algorithm optimized for
signals coming from a videocamera.
13.1.9 VIDEO TYPE
Inserts a filter that improves stability of images from vi-
deo-recorders. To toggle between Normal and VCR mode,
press the VCR key on the remote control.
QUICK MENU
It's possible to access to adjustment herewith showed,
using the P+ and P- keys on remote control, without
recalling the main menu.
INPUT SIGNALS AND ADJUSTABLE/SETTING ITEMS
BRIGHTNESS
CONTRAST
Video
S Video
RGBS
32 kHz
YCrCb
32 kHz
RGB
Graphics
RGBS 15kHz
YCrCb 15kHz
FEATURES
ADJUSTMENTS
INPUT
COLOR - -
-
- -
-
-
-
- -
-
- -
-
-
- TINT (NTSC)
(*)
(*)
(*)
SHARPNESS
SHARPNESS MODE
FILTER
adjustable/can be set
not adjustable/can not be set
not adjustable in the RI2
CINEMA MODE
VIDEO TYPE