Sim2 HT300 - Manual (Page 3)

HT 300
3
ENGLISH
13.2 IMAGE ADJUSTMENTS
This menu features adjustments relating to position,
aspect ratio and magnification etc.
POSITION
ASPECT
ADVANCED SETTINGS
MAGNIFICATION
IMAGE ADJUSTMENTS
VIDEO
ASPECT
FREQUENCY/PHASE
ADVANCED SETTINGS
MAGNIFICATION
POSITION
IMAGE ADJUSTMENTS
MODE 4:3 16:9
RGB
13.2.1 POSITION
Use this adjustment to position the image vertically and
horizontally.
HORIZONTAL: 9
VERTICAL: 6
13.2.2 ASPECT
Determines the aspect ratio of the projected image.
From this menu it is possible to select the aspect ratio by
using the numeric keys 1...8 of the remote control.
Image aspect ratio
selection
5 PIXEL TO PIXEL
7 USER 2
8 USER 3
6 USER 1
1 NORMAL
2 ANAMORPHIC
3 LETTERBOX
4 PANORAMIC
ASPECT
By repeatedly pressing the key or by pressing the
and one of the numeric keys 1...8 of the remote control, it
is possible to select the aspect ratio.
13.2.2.1 Normal
This aspect projects the image occuping the full vertical
dimension of the screen and maintaining the correct
aspect (4:3 or 16:9).
13.2.2.2 Anamorpchic
This aspect allows to properly visualize an image 16:9
13.2.2.3 Letterbox
This aspect allows to project a 4:3 letterbox image fil-ling
the 16:9 screen and maintaining the correct aspect ratio.
13.2.2.4 Panoramic
This aspect stretches the 4:3 image slightly cutting the
upper and lower parts. It's ideal to project a 4:3 image in
a screen of 16:9 aspect ratio.
13.2.2.5 Pixel to Pixel
This aspect projects the signal as it is input without scaling
up or down.
Image is projected in the center of screen.
13.2.2.4 User 1, 2, 3
Should you wish to use a format different to those preset,
go to User menus.
ASPECT / USER 1
HORIZONTAL
VERTICAL
SCREEN CONTROL 0
-10
On Off
By using the Horizontal and Vertical adjustments it is
possible to select the screen shape of your choice. It is
important to keep the relation between height and width
so that the correct aspect ratio can be maintained.
Screen Control. If an appropriate screen-masking
interface is connected to the 12V output socket “
” it is
possible to re-frame the screen to a variety of aspect ratios
and screen sizes (please refer to the screen
manufacturer’s manual).
13.2.3 FREQUENCY / PHASE
In the case of RGB graphic signals this adjustment is used
for synchronization of the RGB image to the number of
pixels on the DLP.
FREQUENCY / PHASE
FREQUENCY
PHASE 1312
-12
RGB
13.2.3.1 Frequency
The correct frequency adjustment eliminates vertical
band interference.