Smart Avi PresenterWall - Manual (Page 9)

9
Section 2
Setting up the PresenterWall Software
2. Installing PresenterWall Software
PresenterWall Software requires a unique CD key to be installed. You will find your key on
the back of the PresenterWall Software CD sleeve. In addition, you must complete the
online registration for your copy of PresenterWall. If you do not register in the thirty-day
window, your PresenterWall software will become disabled. A registration window will open
automatically. If you wish to register at a later date, simply select Help/Registration.
Note: For proper installation of the PresenterWall software, you must insert the USB
protection key provided into any available USB port on your PC before you install the
PresenterWall software. Once inserted, Windows will ask for the drivers; you may cancel
that request; drivers will be installed during installation of the software.
1. Double click on the PresenterWall_Setup executable on your CD. The setup will
have a name similar to “PresenterWALL_Setup v.4.3 2011-05-12_HASP” depending
on the version and date. Read the License Agreement then click ‘I Agree’
2. Enter in your name and organization and enter the unique Serial Number provided
to you.
Important: When entering the Serial Number, please make sure it is typed with ALL
CAPS, or registration will not give you a 30 day grace period. (Figure 2.1)
3. The next window will be to choose components. Select “Full” installation and make
sure that ‘PresenterWall Server,’ ‘PresenterWall Client’ and ‘HTML Editor (KompoZer
0.7.10)’ is checked. (Figure 2.2)
4. Choose the installation location where you would like to install PresenterWall. Click
‘Install’ and installation will begin. (Figure 2.3)
5. A 'New Hardware' notification bubble will appear from the system tray for the USB
protection key. Windows will automatically install the drivers needed for this.
6. Before the installation completes, you will be asked to create a password for the
Administrator account. (Figure 5.4) You must sign in as the Administrator for the
first time you load the PresenterWall Client and Manager. You may set a user name
and password now or leave the default user name “Administrator” and blank
password and edit this later. (For more information on the User Manager, go to
section 2.1 of the manual.)
7. When installation is finished, you will first be asked to log on to the PresenterWall
Client. (Figure 2.5) Use the default (or the name and password you set up) in step
6. Leave the computer IP address as 127.0.0.1 (This is your local IP). Click OK and
your client will be up and running.
8. Finally, click next and you will be asked to reboot your computer. Be sure to save
any other work you may have been doing, highlight “Reboot now,” and click
“Finished” to restart your computer. (Figure 2.6) This will complete the installation
process.