Smart Avi HDMV Multiviewer - Manual (Page 7)

7 www.smartavi.com
Using the On Screen Display
The OSD can be accessed by using the MENU button on the front control panel. The OSD
allows you to change modes, move the OSD position, toggle the hot plugs, and restore the
HDMV to factory defaults.
To change modes with the OSD simply navigate using the following buttons on the front
panel:
1 - Down
2 - Up
4 - Select
FULL - Enter
To save the settings navigate to the “Save” text and Enter (FULL button). The next time the
HDMV is started the current screen mode will load by default.