Spohn D06-1500-FLK - Manual (Page 2)

4. Working on the driver's side, remove the stock outer tie rod from the the stock knuckle.
5. Working on the driver's side, remove the stock hardware that connects the upper control arm to the knuckle.
Save the stock hardware.
6. Working on the driver's side, remove the upper control arm from the knuckle. Let the knuckle hang. Make sure
not to over extended any brake hoses or wires.
7. Working on the driver's side, remove the stock ABS line from the stock clip on the backside of the stock knuckle.