Spohn D06-1500-FLK - Manual (Page 5)

17. Move back to the stock outer tie rod that connects to the knuckle and torque to 65 ft./lbs.
18. Move back to the stock upper control arm that connects to the knuckle and torque to 85 ft lbs.
19. Repeat Steps 2-18 on the passenger's side.
20. Check and double check to make sure that all steps were performed properly and check again.
21. Install the tires and wheels and carefully lower the vehicle to the ground.
Note: After the completion of the installation, we recommend taking the vehicle to an alignment shop and
having a proper front end alignment performed.