Copyright, About this manual, Important note – Sundance SMT401 User Manual

Page 20: Purpose of this manual, Reserved rights, Trademark acknowledgements, Warranty and support, 6 copyright, 1 important note 7.1.2, 3 reserved rights 7.1.4 trademark

Advertising
background image

Released

Page 20 of 21

SMT401 PMC TIM Carrier User Guide

Document Name:

SMT401 User Guide V1.2.doc

Issue : 02

Rev.: 1.11

6 Copyright

Copyright © Sundance Multiprocessor Technology Ltd. 1999, 1997 Alpha
Data Parallel Systems Ltd. All rights reserved.

This publication is protected by Copyright Law, with all rights reserved. No
part of this publication may be reproduced, in any shape or form, without
prior written consent from Sundance Multiprocessor Technology Ltd.

7 About this Manual

7.1.1 Important

Note

Before unpacking and using any the product detailed in this manual, please
read the handling instructions described in section 2.1.

Improper handling of units could result in permanent damage to them.

7.1.2

Purpose of this manual

This manual describes how to install and configure the SMT401 PMC TIM
Motherboard.

7.1.3 Reserved

rights

This manual is designed to provide outline information only. Sundance has a
continual policy of improving its products; hence it reserves the right to
change product specification without prior warning. Sundance cannot accept
any liability for loss or damages arising from the use of this manual or the use
of products detailed within it.

7.1.4 Trademark

acknowledgements

The following are trademarks of Digital Equipment Corporation:

Alpha AXP, PDP-11, VAX, VMS and ULTRIX.

OSF/1 is a registered trademark of the Open Software Foundation, Inc.

UNIX is a registered trademark of UNIX System Laboratories, Inc.

IBM is a registered trademark, and PC/AT is a trademark of International
Business Machines Corporation.

MS-DOS is a registered trademark of Microsoft Corporation.

Intel is a registered trademark of Intel Corporation.

3L is a registered trademark of 3L Ltd.

7.1.5

Warranty and Support

All Sundance products enjoy parts and labour warranty for 12 months after
purchase. The warranty is based on the customer returning the defective
goods to Sundance for repair or replacement, which will be at the discretion
of the company. The warranty does not cover damages caused by

Product Name:

SMT401

Revision Date:

07 December 2004

Author:

Mark I. Cartlidge (Updated by SM, added JTAG slave section)

Original Date:

12 May 1999

Advertising