Starting the recipe – Super Systems SuperDATA Compact Load Entry User Manual
Page 11
Advertising
SuperDATA Compact Load Entry User Guide
Super Systems Inc.
Page 11 of 12
Select the Process and recipe. Tap Select
Recipe when finished. A preview of the recipe
will be shown automatically. Tap Done when
finished previewing.
Starting the Recipe
If you want to preview the recipe again, tap
Preview Recipe.
When the load data is loaded properly, and the
recipe is confirmed, you are ready to start the
recipe. Tap Confirm Load and Start Recipe.
At this time, the selected recipe will be run on
the load you set up.
Advertising