Sureshotgps MICRO V2 - Manual (Page 18)

7. Editing the front, centre and rear of green
The Sureshotgps™ Micro v2 allows you to
edit the mapping of the front, centre and rear
of any mapped hole.
1.
For example, if you are going to correct the distance of the green centre of the
third hole on a course today, press Up and Down key to choose the third hole
on the start menu. When you stand at the green centre you wish to be the new
centre for that hole press Page for 3 seconds and you will see the figures
flashing
2. Press Up and Down key to change the flashing figures to the green centre and
press Enter again, then the Micro v2 will ask you whether to correct the green
centre? Press <OK> and the distance will be reset as <0> which means the
distance between you and the green centre is 0.
3. You can also use the Up and Down keys to choose the front and rear of the
green to make similar corrections.
4. Remember you must be standing on the new position to make the correction for
front, centre and rear of any green.