Sureshotgps MICRO V2 - Manual (Page 5)

4
1. Getting Started
The contents of your Sureshotgps™ Micro v2 Box should include:
• Sureshotgps™ Micro v2 unit with belt clip
• Pouch
• User Manual
• AC Charger
• USB Cable
Fully Charge your Sureshotgps™ Micro v2 Lithium Ion battery.
• Before you start using your Sureshotgps™ Micro v2 you must fully charge the
internal lithium ion battery for approximately 6 hours or overnight. A charging icon
will appear on the screen when charging begins. The Micro v2 will charge fastest
when it is turned off.
• Connect the AC world charger to a suitable power source, using the compatible
AC pin plug. Plug the USB cable from the AC charger into the Sureshotgps Micro
v2. The USB connector is located on the back, near the base of the Sureshotgps
Micro v2 under the rubber cover. Ensure that the orientation of the plug matches
the socket in the Sureshotgps™ Micro v2 unit. Do not force the connection.
• Turn on the power to the AC adapter. You cannot over charge the battery so you
can leave it charging in between use.
• You can also charge the Sureshotgps™ Micro v2 using the supplied USB cable
and connecting it to a computer. Note that you should not charge a completely flat
battery using this method. You should use the AC charger. The battery will take
longer to charge when using the USB cord.