SUUNTO X6OG - Manual (Page 28)

26
on the first row and press the Start button. The selected bearing is displayed on the
third row until you select a new bearing with the Start button again. When you have
selected the bearing tracking, the compass rose in the middle row displays a dotted
vertical line indicating the bearing tracking set.
NOTE: The tracking always remembers the last direction selected, when you next
scroll to it.
• Time. Displays the current time.
NOTE: The shortcuts will also function normally in the power-saving mode. When
you select the bearing shortcut, the compass will automatically be activated.
3.3.2. Use
With the Use function you can define whether the air pressure measurement is used
to measure the altitude or to represent the weather conditions.
If you select the Alti option (altimeter), the measured air pressure is displayed as
altitude and all changes of atmospheric pressure are interpreted as changes in altitude.
When the Alti use is selected, the altitude reading of Compass, Hiking and Hiking
Chrono modes changes, but the atmospheric pressure (sea level) in the second row
of the Weather mode remains constant. The absolute pressure changes if it is se-
lected as a shortcut in the third row of Weather mode.
If you select the Baro option (barometer), the measured air pressure is displayed as
weather information and all changes in atmospheric pressure are interpreted as
being due to a change in the weather.
When the Baro use is selected, the altitude reading in the Compass, Hiking and Hiking
Chrono modes remains constant. The atmospheric pressure (sea level and absolute)
in the Weather mode changes.