SUUNTO X6OG - Manual (Page 37)

35
3.5. HIKING MODE
3.5.1. Main Display
When you select the Hiking mode, the main display opens. The main display has three
rows.
Ascent/descent rate
First row displays the ascent/descent rate in the selected unit. For more information
about defining the unit of rate, refer to page 24.
Altitude
The second row displays the altitude. For more information about defining the unit of
altitude, refer to page 23.
Shortcuts
The third row of the main display contains shortcuts to three functions. To change the
function, press the
Stop/CL button.
• Asc. The cumulative ascent since the logbook was started. If the logbook is not
running, the display shows text “
ASC
0”.
• Differ. When you select the Differ function, it displays the difference in altitude and
time since the last reset of the function. To reset and start a new measurement,
press
Start. Differ is always in the measuring mode, i.e. it measures the time and
altitude difference constantly but displays them only when you select the function.
During the first 10 hours both hours and minutes are displayed. After that, during
the next 89 hours, only hours are displayed and, finally, the display shows only a
dash and letter ‘h’.
• Time. Displays the current time.