Synaps THD-2800 - Manual (Page 4)

4
b. Objects have fallen into, or liquid has been spilled into the appliance enclosure.
c.
The appliance has been exposed to rain.
d. The appliance has been dropped, or the enclosure damaged.
e. The appliance does not appear to operate normally.
f.
The appliance shows a very different performance.
13. SERVICING - The user should not attempt to service the appliance beyond that
described in the user operating instructions. All other servicing should be referred to
qualified service personnel.
14. CLEANING – Disconnect from mains power supply before cleaning. Do not use liquid
or spray cleaners, only use a damp cloth. Follow the care and maintenance instructions
in this manual.
15. LIGHTNING - During lightning and longer periods of non-use please disconnect from
mains power supply and antenna.
16. SAFETY CHECK – After servicing the unit ask the customer service for a safety check.
17. OVERLOAD - To avoid fire and electric shock do not overload wall outlets and
convenience receptacles.
Please note: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications. Such modifications may void the user’s authority to operate
the equipment. Operate tuning controls and switches only as instructed in the manual.
Professional Recycling
Batteries and packaging materials do not belong with household waste.
Batteries must be taken to a collection point for old batteries. Separate disposal
of packaging material helps the environment.
This product cannot be disposed of as normal household rubbish at the end of
its life. It should be taken to a collection point for recycling electrical appliances.
The symbol on the product, the instruction manual or the packaging gives
advice on this.
The materials are recyclable according to their label. By recycling material or
other forms of waste, you are making an important contribution to protecting the
environment.
Please ask your local government for the location of the nearest recycling point.
Installation
Avoid installing the receiver in areas of:
1) Direct sunlight or heating radiators or closed automobiles;
2) High temperature or high humidity;
3) Excessive dust;
4) Excessive vibration, as the internal parts may be seriously damaged.
Avoid Magnetic Objects:
To avoid interferences keep magnetic objects, such as speakers, at a distance from the
satellite receiver.
Stacking:
Place the satellite receiver in an upright position. Do not place the satellite receiver on
amplifiers or other equipment, which may heat up.
Condensation:
If there is moisture inside the satellite receiver, it may not operate properly. Please turn off
the power supply and wait about one hour for the moisture to evaporate.
Mains Power Supply:
Heed the following instructions to avoid malfunction, fire, injury and electric shock:
Check if the mains voltage as shown on the type plate (under the set) corresponds to