Synaps THD-2800 - Manual (Page 5)

5
your local mains voltage. This unit is designed for AC 90-240 50Hz
Connect the mains lead to the AC mains socket and the wall outlet.
To disconnect from wall outlet only pull the plug and not the cable.
Hold the plug tight, when connecting to or disconnecting from wall outlet.
Do not touch the power cord with wet hands.
Protect the power cord from heat generating devices.
Please turn off the satellite receiver if it has been dropped or is damaged otherwise.
Battery Safety Precautions:
Keep batteries away from children and pets.
Insert the battery observing the polarity (+/-). Failure to properly align the battery
polarity can cause personal injury and/or property damage.
Remove exhausted batteries from the device. Remove the batteries when the device
will not be used for extended periods of time to prevent damage due to rusted or
corroded batteries.
Never throw batteries into the fire. Do not expose batteries to fire or other heat
sources.
Battery disposal: exhausted batteries must be properly disposed of and recycled in
compliance with all applicable laws. For detailed information contact your local
municipality’s waste authority.
Follow the battery manufacturer’s safety, usage and disposal instructions.
This unit will warm up when used for a long period of time. This is normal and does not
indicate a malfunction.
This receiver includes microprocessors, which may malfunction as a result of external
electrical interference of noise. If the receiver is not working properly, disconnect from
mains power supply and then reconnect it.
GENERAL INFORMATION
Features
Fully compatible with DVB-T FTA digital standard
Fully compatible with MPEG-4 H.264/AVC High Definition Digital TV
Fully compatible with MPEG-2 High Definition and Standard Definition Output
Fully compatible with MPEG-1 Layer I & II, Dolby Digital Audio
VHF & UHF input and LOOP OUT
Multi-bilingual OSD language , audio language and subtitle language supported
1000 Channels capacity
Fully support to Electronic Program Guide(EPG)
Support Picture in Graphics(PIG)
Support Auto search and Manual search
Parental control for channels
Plug and Play installation with an ease to use Menu System
Coaxial S/PDIF Digital audio output interface
576i, 576P, 720P, 1080I Video Resolution supported
Support 4:3 and 16:9 Aspect Ratio
Support EBU TELETEXT
DVB or EBU subtitle selected by the system based on availability on the network
Various channel editing function(Favorites, Move, Lock, Delete)
Support HDMI High Definition Multimedia Interface(HDMI 1.3)
Software upgrade via USB2.0 interface
High sensitivity, low Eb/No for receive Digital Television
USB 2.0 interface PVR and media player
Record digital television FTA program to a USB Flash Drive or an external USB portable
hard disk and playback via USB2.0