Synaps THD-2856+ - Manual (Page 7)

Init Install
3 INSTALLATION
Installation
4
1
2
3
1
English
4
Press the "MENU" button to enter main menu.
Press "UP"or " DOWN " button to highlight "Installation", press
"RIGHT" button to enter the Installation menu.
You are asked to input a password(the default password is"0000").
Input the correct password by pressing numeric buttons.
Press "UP" or "DOWN" cursor button to highlight the desired item
and press "OK"button to enter the sub-menu .
Press "EXIT" button to exit.
OSD Language
Country
Time Zone
Active Antenna
LCN
Start Search
Init Install
English
Auto
OK EXIT Move Enter Exit
5
Off
Off
Hungary
BACK Back
Auto Search
Manual Search
Channel Filter
Country
LCN
Activve Antenna
OK EXIT Move
Channel
Preference
Enter Exit BACK Back Page+-
Setting
AV
Game
Installation
Main Menu
All Channels
Hungary
Off
Off
Channel No.
Frequency
Bandwidth
Start Search
OK EXIT Move
Channel
Preference
Enter Exit BACK Back Page+-
Setting
AV
Game
Installation
Main Menu/Installation/ Manual Search
21
474000KHz
8M
Strength
Quality 78%
90%
Select "Manual Search", press the "OK" button to enter the Manual
Search menu.
Press "LEFT" cursor button to set Frequency channel,
then highlight "Start Search",
press "OK" button to start channel scan .
Press "LEFT"or "RIGHT"button to set the Antenna Power.
When "Antenna Power" is selected "On", the STB will provide 5V power to antenna.
It will not provide when selected "Off".
3.1 Auto Search
3.2 Manual Search
3.3 Channel Filter
Select the "Auto Search", press "OK" button to start Auto Search , press "EXIT" button to cancel.
3.6 Antenna Power
1
2
Press "OK" or "RIGHT"button to select the All channels or FTA Only.
3.5 LCN
You can activate/disactivate the LCN function by setting the "LCN " to on/off.
If LCN (Logical Channel Number)Select function is activated, you can't change the original
number of TV channels by scanning .
3.4 Country
Press "LEFT" or "RIGHT"button to set the country.
If you use the STB for the first time, the "Installation" menu appears .
Press cursor button to setup the OSD Language, Country, Time Zone,
LCN and Antenna Power.
Highlight "Start Search ", then press the "OK" button to start channel
search.