Synaps THD-2850 - Manual (Page 3)

3
THD-2850/2860/2880
• Switch the receiver off
whenever it remains
out of service for an
extended period.
• Be sure to turn the
Receiver off and
disconnect the
AC power cord before cleaning the Receiver
surface. If the surface is dirty, wipe clean with
a cloth which has been dipped in a weak soap-
and-water
solution and
wrung out
thoroughly,
and then wipe
again with a
dry cloth.
1.3 Unpacking (optional)
• Remote Control
• Batteries
• User’s manual
• AV cable
1.4 General Operation
• Throughout this manual
you will notice that the
everyday operation of
the receiver is based
on a series of user
friendly on screen
display and menus.
These menus will
help you get the most
from your receiver,
guiding you through
installation, channel
organizing, viewing and
many other functions.
• All functions can be
carried out using the
buttons on the RCU,
and some of the
functions can also be
carried out using the buttons on the front panel.
• The receiver is easy to use, always at your
command and adaptable for future advances.
• Please be aware that new software may change
the functionality of the receiver.
• Should you experience any diffi culties with the
operation of your receiver, please consult the
relevant section of this manual, including the
Problem Shooting, or alternatively call your
dealer or a customer service adviser.
1.5 RCU (Remote Control Unit)
Key Function
Turns power ON/OFF
When watching a channel, mute the sound
0-9
Enter number of the required menu item or
select a channel number to watch
TV/RADIO Switches between TV and Radio mode
← PR Switches back to previous channel
FAV Displays the favorite group list
SHIFT Timeshift function key
FIND Display the Find window
INFO Show information of the current channel
MENU
Press this key one time to run menu
onscreen
PAGE+/
PAGE-
Moves up / down a page in the list
OK, LIST
Executes the selected item in the menu
screen or enters the desired value in any
input mode
PR+, PR-
When watching a channel, change channels
or move to the next higher or lower item in
the menu
When watching a channel, adjust the
volume or move to the left or right item in
the menu
EXIT
Return to the previous menu on the menu
screen or escape from the menu
EPG Call up the EPG (Electronic Program Guide)
Display the Audio window.
TV/AV Switch between TV and AV modes
TXT Switch to teletext mode
SLEEP Enter into the sleep in mode
PAUSE
Press once to pause the screen picture,
press once again to go to the normal mode
RECORD Record the program
V-FORMAT Changes the HD-Format
Switch to subtitle mode
►,
■
Play and stop the program
◄◄, ►► Press to fast forward or fast backward
◄, ► Press to slow forward or slow backward